DESCRIPTION:
How to Error a room using Kick raw-data.
Found by Jexius.
This script uses a RawData method, for a RawData Tutorial: Click Here]
NEEDED:
Packet Finder/Editor, ArtMoney, serverside-rights and a moodlight
[For an ArtMoney Tutorial: Click Here]
HOW:
1.) Load up The Packet Finder/Editor
2.) Start the Packet-Finder and go into an empty room
3.) First copy and paste the code that looks like this:
(Remember, this is only an example and
doesn't have the correct Chrs. Thus it will error you if sent; find
your own packet the way I have told you.)
And place it in a blank notepad [or something similar]
4.) Now go to your own room with the moodlight you wish to blackout.
(Note: You can do it in other rooms but the moodlight it hard to "stick" this way)
5.) Now you need to smuggle one of the below packet in using raw data
Background only:
Foreground(Full Blackout):
6.) To do this you need the packet from earlier and you need to change the UserName like below:
for example:
(Remember, this is only an example and
doesn't have the correct Chrs. Thus it will error you if sent; find
your own packet the way I have told you.)
7.) Next change the value A_ to EV in ArtMoney
[You may error here though it is unusual, if you do just reload your packetlogger and start again]
8.) Now open the moodlight panel, send the packet and kick the Habbo that appears, the moodlight will now blackout.
9.) Now pick up the moodlight and re-drop it (this sticks the moodlight so you can change it from Backgroun to Foreground)
N.) If you change the setting on the colour you blacked-out the moodlight on, it will break and you will have to redo it.
- Tutorial was written by Alex (Shenk.)
Any errors in this tutorial should be emailed to or reported on the ShoutBox.
or reported on the ShoutBox.