DESCRIPTION:
How to warp inside furniture using Kick raw-data.
This script uses a RawData method, for a RawData Tutorial: Click Here]
NEEDED:
Packet Finder/Editor and ArtMoney
[For an ArtMoney Tutorial: Click Here]
HOW:
1.) Load up The Packet Finder/Editor
2.) Start the Packet-Finder and go into an empty room
3.) First copy and paste the code that looks like this:
(Remember, this is only an example and doesn't have the correct Chrs. Thus it will error you if sent; find your own packet the way I have told you.)
And place it in a blank notepad [or something similar]
4.) Now enter the room you wish to warp in.
5.) When you enter the room search for a packet like below:
6.) Once you have found the packet and copy&pasted it into a blank notepad [or something similar] search for the furni you wish to warp-inside, the packet will look like below:
7.) Once you've located this add it to your packet like below:
example:
8.) Now send @o if you do not already have rights in the room
9.) Now smuggle the WarpID into Habbo.
10.) To do this you need the packet from earlier and you need to change the UserName like below:
for example:
(Remember, this is only an example and doesn't have the correct Chrs. Thus it will error you if sent; find your own packet the way I have told you.)
11.) Next change the value A_ to @v in ArtMoney
[You may error here though it is unusual, if you do just reload your packetlogger and start again]
12.) Now send the packet and kick the Habbo that appears, you should be inside the desired furni.
- Tutorial was written by Alex (Shenk.)
Any errors in this tutorial should be emailed to or reported on the ShoutBox.
or reported on the ShoutBox.